Miles Systems LLC / 74th Mile
A garden on a
whisky barrel.
Five levels of plants share the water in one barrel. Before we build it, help us spot what might be hard to reach, clean, or use.
23 plant cups · 53-gallon barrel · About 5′ 3″ tall before the light

Garden tour
Take a closer look.

01 / 03
Could you lift out a full-grown plant?
Each plant sits in a cup you can lift out. A small plant clears the rings in our model. With a bigger plant, leaves catch a ring or a neighbor in 18 of the 23 spots.
Picture pulling out a big basil plant. What looks like it would get in your way?
Explore all three water lessons Leave a note about the cupsInteractive water lessons
From barrel to sprayer.
One pump lifts water out of the barrel. At the top, valves divide it among the plant cups, bee shelves, and sprayers. Look inside each part and try the controls yourself.

Lesson 1 · The pump
What moves the water?
Turn the shaft by hand. Watch a chamber draw in water, then push it past a one-way valve. Close the test outlet to see why the motor stops.
Look inside the pump
Lesson 2 · The pressure system
Where does the water go?
Open the return to the barrel, then try the three ceiling sprayers. See what happens when one tip clogs and when you close the valve they share.
Trace the pressure system
Lesson 3 · The sprayers
What turns water into a swirl?
Look inside the removable cyclone cartridge. Follow its sideways inlet, compare the two outlet sizes, and twist out the tip for cleaning.
Explore the sprayerA HydroHex of your own
Choose your HydroHex.
Complete barrel system
$1,200
The complete HydroHex system, including the tower, barrel and pump. Contact Richard for availability, lead time and delivery.
Ask about a buildGrow light not included. Tax and delivery are additional.
Self-print design package
$200
Get the HydroHex designs and print the parts yourself. You supply the printer, filament, hardware, barrel and pump.
Get the designsDigital designs only. Email Richard for file details and access.
Questions? richard@miles.systems
The first build
What a drawing
can’t tell us.
We still need to print one level and run water through it. Three things to try first:
- Pull a full-grown plant out with the rail in place.
- Open a bee shelf and see whether the sprayers still mist and the joints stay dry.
- Turn the pump off, watch where the water collects, then remove and clean a tip.
Design feedback
What would you change?
One thing you’d keep, move, or try is plenty. Your note goes privately to Miles Systems.